Cisco ConfigMaker V 2.6 [FULL Version] Download
Cisco ConfigMaker v 2.6 [FULL Version] download
If you are looking for a software tool that can help you configure a small network of Cisco routers, switches, hubs, and other devices, you might be interested in Cisco ConfigMaker v 2.6. This is a free and easy-to-use application that runs on Windows 98, Me, NT 4.0, 2000, and XP. It can automatically create configuration files for your devices while you create a diagram of your network. It can also assist you with previously configured devices by reading the existing configuration, issuing show commands, pinging, and Telnetting to them.
Download Zip: https://tweeat.com/2w3D1e
In this article, we will show you how to download the full version of Cisco ConfigMaker v 2.6 from Cisco.com and how to use it to configure your network devices.
How to download Cisco ConfigMaker v 2.6
The Cisco ConfigMaker v 2.6 application is free of charge and is available only by downloading from Cisco.com. Follow these steps to download it from the network:
Enter the following URL in a web browser: [Cisco ConfigMaker].
Click on the Download Software link under the Software Center section.
Select the version of Cisco ConfigMaker that you want to download from the drop-down menu. The latest version is v 2.6.
Click on the Download button next to the file name. The file name is configmaker_v26.exe and the file size is 15.9 MB.
Save the file to your local drive.
Double-click on the file to launch the installation wizard.
Follow the instructions on the screen to complete the installation.
How to use Cisco ConfigMaker v 2.6
After installing Cisco ConfigMaker v 2.6, you can use it to configure your network devices. Here are some of the key features and steps that you can use:
Cisco ConfigMaker can help you configure the following:
Cisco 800, 1000, 1600, 1700, 2500, 2600, 3600, and 4000 series routers
Cisco 1548 and 1548M switches
Cisco FastHub 412, 412M, 424, and 424M hubs and hub stacks
Ethernet and Fast Ethernet LAN connections
ISDN BRI, ISDN PRI, ISDN leased line, Frame Relay, Point-to-Point Protocol (PPP) (serial), High-Level Data Link (HDLC), PPP over Ethernet (PPPoE), and asynchronous WAN connections
Transmission Control Protocol/Internet Protocol (TCP/IP), Internetwork Packet Exchange (IPX), and AppleTalk Phase 2 routed protocols
Enhanced Interior Gateway Routing Protocol (EIGRP) and Routing Information Protocol (RIP) version 2
Cisco IOS Firewall features including Context-based Access Control (CBAC), global timer values, DOS attack thresholds, Java blocking, audit trail, and access lists
Voice-over-IP (VoIP) connections to telephones, faxes, PBXs, and PSTNs
Virtual Private Network (VPN) connections using IP Security (IPSec) and Internet Key Exchange (IKE) authentication and encryption protocols
Committed Access Rate (CAR) quality-of-service (QoS) protocol
Dial backup connections
Dynamic Host Configuration Protocol (DHCP) server and DHCP relay features
Network Address Translation (NAT) and Easy IP (Phase 1) addressing
Device Simple Network Management Protocol (SNMP) read community strings, SNMP read/write community strings, and SNMP trap managers
Channel service unit/data service unit (CSU/DSU) modules
QoS settings on WAN links for VoIP
Multiple WAN connections
Read-back of NAT configuration
PPPoE on Cisco 1700 series routers with Ethernet connections
To start Cisco ConfigMaker, click on the Start button, point to Programs, point to Cisco ConfigMaker, and then click on Cisco ConfigMaker.
To create a new network diagram, click on the New button on the toolbar or select File > New from the menu bar.
To add devices to your network diagram, click on the Device Wizard button on the toolbar or select Tools > Device Wizard from the menu bar. The Device Wizard will prompt you for information about the devices on your network in an easy, step-by-step manner.
To add connections to your network diagram, click on the Connection Wizard button on the toolbar or select Tools > Connection Wizard from the menu bar. The Connection Wizard will prompt you for information about the connections on your network in an easy, step-by-step manner.
To view or edit the configuration of a device, double-click on the device icon on the network diagram or right-click on it and select Properties from the pop-up menu. The Device Properties dialog box will show you the configuration of the device and allow you to make changes to it.
To save your network diagram and configuration files, click on the Save button on the toolbar or select File > Save from the menu bar. You can also save your network diagram as an image file by selecting File > Save As Image from the menu bar.
To apply the configuration files to your devices, click on the Apply button on the toolbar or select Tools > Apply from the menu bar. You can also apply the configuration files to selected devices by right-clicking on them and selecting Apply from the pop-up menu. Cisco ConfigMaker will connect to your devices using Telnet or TFTP and upload the configuration files to them.
To verify that your devices are configured correctly, you can use Cisco ConfigMaker to read the existing configuration from them, issue show commands, ping them, or Telnet to them. To do this, right-click on a device and select one of these options from the pop-up menu.
Cisco ConfigMaker v 2.6 is a powerful and user-friendly software tool that can help you configure a small network of Cisco routers, switches, hubs, and other devices. It can automatically create configuration files for your devices while you create a diagram of your network. It can also assist you with previously configured devices by reading the existing configuration, issuing show commands, pinging, and Telnetting to them. You can download the full version of Cisco ConfigMaker v 2.6 from Cisco.com for free and use it to configure your network devices.
We hope this article has been helpful for you. If you have any questions or feedback, please feel free to contact us.